And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.819
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.883
And
I accept adding "cowsay" to Additional Software
4.002
And
Additional Software is correctly configured for package "cowsay"
0.653
And
I shutdown Tails and wait for the computer to power off
7.348
And
I start Tails from USB drive "__internal" with network unplugged
39.803
And
I enable persistence
7.686
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.621
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.056
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.336
And
I can open the Additional Software configuration window from the notification
2.751
And
I shutdown Tails and wait for the computer to power off
22.265
And
I start Tails from USB drive "__internal" with network unplugged
40.001
And
I enable persistence
7.385
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
10.673
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.385
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073