And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.994
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.107
And
I accept adding "cowsay" to Additional Software
5.796
And
Additional Software is correctly configured for package "cowsay"
0.870
And
I shutdown Tails and wait for the computer to power off
4.831
And
I start Tails from USB drive "__internal" with network unplugged
44.295
And
I enable persistence
9.709
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
12.890
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.064
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.274
And
I can open the Additional Software configuration window from the notification
2.923
And
I shutdown Tails and wait for the computer to power off
17.436
And
I start Tails from USB drive "__internal" with network unplugged
44.083
And
I enable persistence
7.963
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
14.363
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.840
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.214
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071