And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:42.670
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.095
And
I accept adding "cowsay" to Additional Software
7.546
And
Additional Software is correctly configured for package "cowsay"
0.860
And
I shutdown Tails and wait for the computer to power off
8.340
And
I start Tails from USB drive "__internal" with network unplugged
45.343
And
I enable persistence
7.800
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
14.389
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.339
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.104
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.722
And
I can open the Additional Software configuration window from the notification
2.874
And
I shutdown Tails and wait for the computer to power off
2:6.889
And
I start Tails from USB drive "__internal" with network unplugged
44.560
And
I enable persistence
9.194
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
14.516
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.386
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.350
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.196