And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.278
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.417
And
I accept adding "cowsay" to Additional Software
5.462
And
Additional Software is correctly configured for package "cowsay"
1.892
And
I shutdown Tails and wait for the computer to power off
8.279
And
I start Tails from USB drive "__internal" with network unplugged
45.726
And
I enable persistence
10.903
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
11.790
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.388
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.056
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.714
And
I can open the Additional Software configuration window from the notification
2.843
And
I shutdown Tails and wait for the computer to power off
18.725
And
I start Tails from USB drive "__internal" with network unplugged
48.586
And
I enable persistence
11.214
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
15.593
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092