And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.231
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.937
And
I accept adding "cowsay" to Additional Software
3.941
And
Additional Software is correctly configured for package "cowsay"
1.241
And
I shutdown Tails and wait for the computer to power off
7.570
And
I start Tails from USB drive "__internal" with network unplugged
42.053
And
I enable persistence
7.412
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
13.103
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.391
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.063
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.906
And
I can open the Additional Software configuration window from the notification
2.879
And
I shutdown Tails and wait for the computer to power off
22.598
And
I start Tails from USB drive "__internal" with network unplugged
41.648
And
I enable persistence
7.350
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.426
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.898
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079