And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:31.456
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.016
And
I accept adding "cowsay" to Additional Software
5.448
And
Additional Software is correctly configured for package "cowsay"
0.750
And
I shutdown Tails and wait for the computer to power off
7.894
And
I start Tails from USB drive "__internal" with network unplugged
43.282
And
I enable persistence
7.898
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
14.689
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.404
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.092
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.071
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.389
And
I can open the Additional Software configuration window from the notification
2.903
And
I shutdown Tails and wait for the computer to power off
17.068
And
I start Tails from USB drive "__internal" with network unplugged
44.409
And
I enable persistence
8.989
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.288
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
1.879
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075