And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:41.710
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.227
And
I accept adding "cowsay" to Additional Software
5.855
And
Additional Software is correctly configured for package "cowsay"
0.870
And
I shutdown Tails and wait for the computer to power off
7.970
And
I start Tails from USB drive "__internal" with network unplugged
45.011
And
I enable persistence
11.959
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
13.036
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.530
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.073
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.711
And
I can open the Additional Software configuration window from the notification
2.955
And
I shutdown Tails and wait for the computer to power off
24.979
And
I start Tails from USB drive "__internal" with network unplugged
46.653
And
I enable persistence
7.797
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
14.722
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.216
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089