And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:38.910
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.090
And
I accept adding "cowsay" to Additional Software
5.641
And
Additional Software is correctly configured for package "cowsay"
0.831
And
I shutdown Tails and wait for the computer to power off
7.752
And
I start Tails from USB drive "__internal" with network unplugged
41.209
And
I enable persistence
8.584
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
12.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.360
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.058
And
available upgrades have been checked
0.131
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.594
And
I can open the Additional Software configuration window from the notification
2.936
And
I shutdown Tails and wait for the computer to power off
2:6.794
And
I start Tails from USB drive "__internal" with network unplugged
43.316
And
I enable persistence
9.220
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.179
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.422
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.293
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075