And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:35.532
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.258
And
I accept adding "cowsay" to Additional Software
5.477
And
Additional Software is correctly configured for package "cowsay"
0.740
And
I shutdown Tails and wait for the computer to power off
7.758
And
I start Tails from USB drive "__internal" with network unplugged
45.859
And
I enable persistence
7.663
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
14.155
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.454
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.062
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.227
And
I can open the Additional Software configuration window from the notification
2.842
And
I shutdown Tails and wait for the computer to power off
18.176
And
I start Tails from USB drive "__internal" with network unplugged
43.733
And
I enable persistence
10.213
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.650
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.363
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079