And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.457
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.827
And
I accept adding "cowsay" to Additional Software
5.749
And
Additional Software is correctly configured for package "cowsay"
0.743
And
I shutdown Tails and wait for the computer to power off
8.652
And
I start Tails from USB drive "__internal" with network unplugged
43.427
And
I enable persistence
9.100
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
13.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.372
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.089
And
the network is plugged
0.069
And
available upgrades have been checked
1.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.539
And
I can open the Additional Software configuration window from the notification
2.819
And
I shutdown Tails and wait for the computer to power off
12.807
And
I start Tails from USB drive "__internal" with network unplugged
43.835
And
I enable persistence
9.472
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.284
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.383
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.128