And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:35.661
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.944
And
I accept adding "cowsay" to Additional Software
5.412
And
Additional Software is correctly configured for package "cowsay"
0.770
And
I shutdown Tails and wait for the computer to power off
7.732
And
I start Tails from USB drive "__internal" with network unplugged
44.950
And
I enable persistence
9.298
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
13.599
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.952
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.135
And
I prepare the Additional Software upgrade process to fail
0.115
And
the network is plugged
0.066
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.663
And
I can open the Additional Software configuration window from the notification
5.428
And
I shutdown Tails and wait for the computer to power off
23.500
And
I start Tails from USB drive "__internal" with network unplugged
44.997
And
I enable persistence
7.764
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
15.701
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.386
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.223
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084