And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.005
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.048
And
I accept adding "cowsay" to Additional Software
5.399
And
Additional Software is correctly configured for package "cowsay"
0.735
And
I shutdown Tails and wait for the computer to power off
10.318
And
I start Tails from USB drive "__internal" with network unplugged
45.942
And
I enable persistence
10.465
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
14.631
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.437
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.065
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.784
And
I can open the Additional Software configuration window from the notification
2.900
And
I shutdown Tails and wait for the computer to power off
22.722
And
I start Tails from USB drive "__internal" with network unplugged
46.128
And
I enable persistence
10.293
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
14.592
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.445
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.172
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073