And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:35.144
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.154
And
I accept adding "cowsay" to Additional Software
5.359
And
Additional Software is correctly configured for package "cowsay"
0.828
And
I shutdown Tails and wait for the computer to power off
8.747
And
I start Tails from USB drive "__internal" with network unplugged
45.636
And
I enable persistence
8.174
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
14.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.051
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.257
And
I can open the Additional Software configuration window from the notification
3.077
And
I shutdown Tails and wait for the computer to power off
23.681
And
I start Tails from USB drive "__internal" with network unplugged
44.745
And
I enable persistence
7.940
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.361
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.336
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.091
And
the network is plugged
0.109
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062