And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.265
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.299
And
I accept adding "cowsay" to Additional Software
6.924
And
Additional Software is correctly configured for package "cowsay"
0.755
And
I shutdown Tails and wait for the computer to power off
3.429
And
I start Tails from USB drive "__internal" with network unplugged
46.552
And
I enable persistence
10.032
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
15.608
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.635
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.276
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.948
And
I can open the Additional Software configuration window from the notification
3.228
And
I shutdown Tails and wait for the computer to power off
12.767
And
I start Tails from USB drive "__internal" with network unplugged
44.509
And
I enable persistence
10.409
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
14.468
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.522
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090