And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:34.632
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.479
And
I accept adding "cowsay" to Additional Software
6.303
And
Additional Software is correctly configured for package "cowsay"
0.944
And
I shutdown Tails and wait for the computer to power off
7.763
And
I start Tails from USB drive "__internal" with network unplugged
42.280
And
I enable persistence
9.343
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
14.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.909
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.081
And
available upgrades have been checked
0.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.214
And
I can open the Additional Software configuration window from the notification
2.897
And
I shutdown Tails and wait for the computer to power off
18.881
And
I start Tails from USB drive "__internal" with network unplugged
42.505
And
I enable persistence
8.116
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080