And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:40.434
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.282
And
I accept adding "cowsay" to Additional Software
6.291
And
Additional Software is correctly configured for package "cowsay"
0.819
And
I shutdown Tails and wait for the computer to power off
7.879
And
I start Tails from USB drive "__internal" with network unplugged
45.716
And
I enable persistence
9.151
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
16.594
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.574
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.052
And
available upgrades have been checked
0.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.496
And
I can open the Additional Software configuration window from the notification
3.892
And
I shutdown Tails and wait for the computer to power off
22.620
And
I start Tails from USB drive "__internal" with network unplugged
42.864
And
I enable persistence
7.611
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
15.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.753
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082