Project Number Date
test_Tails_ISO_stable 5986 06 Dec 2025, 11:37

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 67 1 7 0 0 75 9 1 10 19:12.533 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
25.179
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 8.289
And I temporarily create a 4 GiB disk named "gptfat" 0.053
And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.050
And I plug USB drive "gptfat" 2.355
When I start Tails Installer 10.382
Then I am told by Tails Installer that the destination device "is too small" 0.049
After features/support/hooks.rb:331 2.205
After features/support/hooks.rb:100 0.001
Tags: @product
29.843
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails from DVD without network and logged in 17.296
And I temporarily create a 7200 MiB disk named "temp" 0.054
And I start Tails Installer 9.352
But a suitable USB device is not found 0.060
When I plug USB drive "temp" 2.779
Then the "temp" USB drive is selected 0.084
When I unplug USB drive "temp" 0.186
Then a suitable USB device is not found 0.028
After features/support/hooks.rb:331 2.274
After features/support/hooks.rb:100 0.001
Tags: @product
2:31.984
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.006
Given I have started Tails from DVD without network and logged in 8.348
And I temporarily create a 7200 MiB disk named "install" 0.058
And I create a gpt partition with a vfat filesystem on disk "install" 4.261
And I plug USB drive "install" 2.389
And I install Tails to USB drive "install" by cloning 1:56.042
Then the running Tails is installed on USB drive "install" 17.108
And there is a random seed on USB drive "install" 3.710
But there is no persistence partition on USB drive "install" 0.063
After features/support/hooks.rb:331 1.091
After features/support/hooks.rb:100 0.083
Tags: @product
2:28.107
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 8.292
And I temporarily create a 7200 MiB disk named "install" 0.055
And I plug USB drive "install" 2.344
And I install Tails to USB drive "install" by cloning 1:55.998
Then the running Tails is installed on USB drive "install" 16.699
And there is a random seed on USB drive "install" 4.652
But there is no persistence partition on USB drive "install" 0.064
After features/support/hooks.rb:331 1.133
After features/support/hooks.rb:100 0.095
Tags: @product
2:57.543
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.190
And I create a file in the Persistent directory 0.080
And I temporarily create a 7200 MiB disk named "install" 0.050
And I create a gpt partition with a vfat filesystem on disk "install" 4.419
And I plug USB drive "install" 2.858
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:9.693
Then the running Tails is installed on USB drive "install" 21.738
And there is a random seed on USB drive "install" 3.716
And there is a persistence partition on USB drive "install" 0.101
And the USB drive "install" contains the same files as my persistent storage 4.693
After features/support/hooks.rb:331 1.107
After features/support/hooks.rb:100 0.118
Tags: @product
2:32.316
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.127
And I temporarily create a 7200 MiB disk named "install" 0.071
And I plug USB drive "install" 2.394
And I install Tails to USB drive "install" by cloning 1:55.294
Then the running Tails is installed on USB drive "install" 20.683
And there is a random seed on USB drive "install" 3.684
And there is no persistence partition on USB drive "install" 0.061
After features/support/hooks.rb:331 0.801
After features/support/hooks.rb:100 0.090
Tags: @product
2:43.133
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.186
And I have started Tails from DVD without network and logged in 8.471
And I clone USB drive "__internal" to a temporary USB drive "install" 1.373
And I plug USB drive "install" 4.694
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:55.862
Then the running Tails is installed on USB drive "install" 17.507
And there is a random seed on USB drive "install" 3.974
And there is no persistence partition on USB drive "install" 0.063
After features/support/hooks.rb:331 1.084
After features/support/hooks.rb:100 0.190
Tags: @product @uefi
1:31.166
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.811
And I power off the computer 0.303
And the computer is set to boot in UEFI mode 0.045
When I start Tails from USB drive "__internal" with network unplugged and I login 1:16.173
Then Tails is running from USB drive "__internal" 0.628
And the boot device has safe access rights 3.156
And Tails has started in UEFI mode 0.047
After features/support/hooks.rb:331 0.754
After features/support/hooks.rb:100 0.007
Tags: @product
1:56.155
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails from DVD without network and logged in 8.016
And I plug and mount a USB drive containing a Tails USB image 36.948
And I create a 7200 MiB disk named "usbimage" 0.050
And I plug USB drive "usbimage" 2.409
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:8.730
After features/support/hooks.rb:331 1.590
After features/support/hooks.rb:100 0.069
Tags: @product
1:37.103
Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Steps
Given a computer 0.177
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:36.925
cannot 
cannot find TailsGreeter.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/common_steps.rb:439:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:235:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:100:in `And I start Tails from USB drive "usbimage" with network unplugged and I login'
Then Tails is running from USB drive "usbimage" 0.000
And the label of the system partition on "usbimage" is "Tails" 0.000
And the system partition on "usbimage" is an EFI system partition 0.000
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.000
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.000
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.000
And the system partition on "usbimage" has the expected flags 0.000
After features/support/hooks.rb:331 5.175 
SCENARIO FAILED: 'The system partition is updated when booting from a USB drive where a Tails USB image was copied' (at time 00:58:50)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5986/artifact/build-artifacts/00:58:50_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5986/artifact/build-artifacts/00:58:50_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5986/artifact/build-artifacts/00:58:50_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_stable/5986/artifact/build-artifacts/00:58:50_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.journal
After features/support/hooks.rb:100 0.007