And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.623
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.119
And
I accept adding "cowsay" to Additional Software
5.474
And
Additional Software is correctly configured for package "cowsay"
0.772
And
I shutdown Tails and wait for the computer to power off
7.610
And
I start Tails from USB drive "__internal" with network unplugged
40.928
And
I enable persistence
7.853
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
15.229
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.563
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.066
And
available upgrades have been checked
0.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.885
And
I can open the Additional Software configuration window from the notification
2.958
And
I shutdown Tails and wait for the computer to power off
23.168
And
I start Tails from USB drive "__internal" with network unplugged
42.758
And
I enable persistence
8.163
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.381
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.400
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083