And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:39.198
And
I configure APT to prefer an old version of cowsay
0.040
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
13.611
And
I accept adding "cowsay" to Additional Software
5.711
And
Additional Software is correctly configured for package "cowsay"
0.673
And
I shutdown Tails and wait for the computer to power off
8.585
And
I start Tails from USB drive "__internal" with network unplugged
44.823
And
I enable persistence
7.894
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
15.918
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.093
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.510
And
I can open the Additional Software configuration window from the notification
3.312
And
I shutdown Tails and wait for the computer to power off
22.521
And
I start Tails from USB drive "__internal" with network unplugged
46.422
And
I enable persistence
8.161
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
14.928
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.311
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068