And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.774
And
I configure APT to prefer an old version of cowsay
0.071
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.753
And
I accept adding "cowsay" to Additional Software
6.301
And
Additional Software is correctly configured for package "cowsay"
0.865
And
I shutdown Tails and wait for the computer to power off
8.079
And
I start Tails from USB drive "__internal" with network unplugged
42.089
And
I enable persistence
10.182
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
12.960
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.950
And
available upgrades have been checked
0.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.556
And
I can open the Additional Software configuration window from the notification
2.966
And
I shutdown Tails and wait for the computer to power off
4.841
And
I start Tails from USB drive "__internal" with network unplugged
46.236
And
I enable persistence
7.432
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
13.881
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.419
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.051
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071