And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:1.013
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.151
And
I accept adding "cowsay" to Additional Software
5.352
And
Additional Software is correctly configured for package "cowsay"
0.794
And
I shutdown Tails and wait for the computer to power off
8.035
And
I start Tails from USB drive "__internal" with network unplugged
43.352
And
I enable persistence
7.417
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
13.180
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.846
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
1.520
And
available upgrades have been checked
0.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.529
And
I can open the Additional Software configuration window from the notification
2.707
And
I shutdown Tails and wait for the computer to power off
17.631
And
I start Tails from USB drive "__internal" with network unplugged
45.355
And
I enable persistence
8.039
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.623
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.826
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.149