And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.084
And
I configure APT to prefer an old version of cowsay
0.051
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.221
And
I accept adding "cowsay" to Additional Software
5.643
And
Additional Software is correctly configured for package "cowsay"
1.212
And
I shutdown Tails and wait for the computer to power off
8.451
And
I start Tails from USB drive "__internal" with network unplugged
46.012
And
I enable persistence
11.124
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
12.426
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.435
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.110
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.051
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.398
And
I can open the Additional Software configuration window from the notification
2.916
And
I shutdown Tails and wait for the computer to power off
17.500
And
I start Tails from USB drive "__internal" with network unplugged
45.465
And
I enable persistence
9.611
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.970
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061