And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:5.002
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.720
And
I accept adding "cowsay" to Additional Software
7.017
And
Additional Software is correctly configured for package "cowsay"
0.832
And
I shutdown Tails and wait for the computer to power off
7.802
And
I start Tails from USB drive "__internal" with network unplugged
1:4.257
And
I enable persistence
9.007
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
12.282
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.450
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.074
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.584
And
I can open the Additional Software configuration window from the notification
2.876
And
I shutdown Tails and wait for the computer to power off
18.745
And
I start Tails from USB drive "__internal" with network unplugged
1:4.861
And
I enable persistence
9.619
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.570
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.329
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099