And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.321
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.626
And
I accept adding "cowsay" to Additional Software
5.476
And
Additional Software is correctly configured for package "cowsay"
0.721
And
I shutdown Tails and wait for the computer to power off
7.588
And
I start Tails from USB drive "__internal" with network unplugged
1:8.830
And
I enable persistence
16.259
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
12.104
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.462
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.071
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.400
And
I can open the Additional Software configuration window from the notification
3.007
And
I shutdown Tails and wait for the computer to power off
23.727
And
I start Tails from USB drive "__internal" with network unplugged
1:6.756
And
I enable persistence
8.559
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
13.994
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.350
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.148
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097