And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.259
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.503
And
I accept adding "cowsay" to Additional Software
5.936
And
Additional Software is correctly configured for package "cowsay"
0.909
And
I shutdown Tails and wait for the computer to power off
8.135
And
I start Tails from USB drive "__internal" with network unplugged
1:4.394
And
I enable persistence
10.032
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
12.258
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.320
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.061
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.579
And
I can open the Additional Software configuration window from the notification
2.958
And
I shutdown Tails and wait for the computer to power off
2:6.838
And
I start Tails from USB drive "__internal" with network unplugged
1:7.453
And
I enable persistence
8.229
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
15.446
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.372
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086