And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.260
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.169
And
I accept adding "cowsay" to Additional Software
6.015
And
Additional Software is correctly configured for package "cowsay"
0.932
And
I shutdown Tails and wait for the computer to power off
8.263
And
I start Tails from USB drive "__internal" with network unplugged
1:6.527
And
I enable persistence
9.315
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
12.345
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.413
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
2.158
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.003
And
I can open the Additional Software configuration window from the notification
4.980
And
I shutdown Tails and wait for the computer to power off
16.926
And
I start Tails from USB drive "__internal" with network unplugged
1:4.453
And
I enable persistence
8.624
And
I configure APT to prefer an old version of cowsay
0.048
And
I log in to a new session
14.319
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.838
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.177
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075