And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.719
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.517
And
I accept adding "cowsay" to Additional Software
7.440
And
Additional Software is correctly configured for package "cowsay"
0.774
And
I shutdown Tails and wait for the computer to power off
7.689
And
I start Tails from USB drive "__internal" with network unplugged
1:6.685
And
I enable persistence
9.272
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
14.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.885
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.057
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.248
And
I can open the Additional Software configuration window from the notification
3.554
And
I shutdown Tails and wait for the computer to power off
17.560
And
I start Tails from USB drive "__internal" with network unplugged
1:7.461
And
I enable persistence
7.942
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.464
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.524
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089