And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:8.855
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
12.022
And
I accept adding "cowsay" to Additional Software
4.109
And
Additional Software is correctly configured for package "cowsay"
0.740
And
I shutdown Tails and wait for the computer to power off
8.440
And
I start Tails from USB drive "__internal" with network unplugged
1:6.424
And
I enable persistence
8.095
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
14.303
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.768
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
3.021
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.322
And
I can open the Additional Software configuration window from the notification
3.093
And
I shutdown Tails and wait for the computer to power off
22.367
And
I start Tails from USB drive "__internal" with network unplugged
1:7.796
And
I enable persistence
9.611
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.260
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.275
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092