And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.839
And
I configure APT to prefer an old version of cowsay
0.199
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.461
And
I accept adding "cowsay" to Additional Software
5.286
And
Additional Software is correctly configured for package "cowsay"
0.916
And
I shutdown Tails and wait for the computer to power off
5.502
And
I start Tails from USB drive "__internal" with network unplugged
1:8.066
And
I enable persistence
8.175
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
14.554
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.330
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.053
And
available upgrades have been checked
0.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.758
And
I can open the Additional Software configuration window from the notification
3.487
And
I shutdown Tails and wait for the computer to power off
23.445
And
I start Tails from USB drive "__internal" with network unplugged
1:6.559
And
I enable persistence
8.817
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
13.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.382
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.056
Then
the Additional Software upgrade service has started
0.137
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068