And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.407
And
I configure APT to prefer an old version of cowsay
0.040
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.436
And
I accept adding "cowsay" to Additional Software
7.133
And
Additional Software is correctly configured for package "cowsay"
0.825
And
I shutdown Tails and wait for the computer to power off
8.041
And
I start Tails from USB drive "__internal" with network unplugged
1:5.128
And
I enable persistence
7.947
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
13.219
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.428
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.090
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.034
And
I can open the Additional Software configuration window from the notification
3.512
And
I shutdown Tails and wait for the computer to power off
2:2.561
And
I start Tails from USB drive "__internal" with network unplugged
1:5.036
And
I enable persistence
7.575
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.125
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.967
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108