And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.006
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.432
And
I accept adding "cowsay" to Additional Software
5.687
And
Additional Software is correctly configured for package "cowsay"
0.751
And
I shutdown Tails and wait for the computer to power off
7.671
And
I start Tails from USB drive "__internal" with network unplugged
1:3.797
And
I enable persistence
8.336
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.086
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.883
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.053
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.427
And
I can open the Additional Software configuration window from the notification
2.726
And
I shutdown Tails and wait for the computer to power off
18.297
And
I start Tails from USB drive "__internal" with network unplugged
1:3.196
And
I enable persistence
7.970
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.443
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.303
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063