And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.350
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.356
And
I accept adding "cowsay" to Additional Software
8.841
And
Additional Software is correctly configured for package "cowsay"
0.784
And
I shutdown Tails and wait for the computer to power off
3.276
And
I start Tails from USB drive "__internal" with network unplugged
1:7.577
And
I enable persistence
8.274
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
14.839
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.336
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.048
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.070
And
I can open the Additional Software configuration window from the notification
2.950
And
I shutdown Tails and wait for the computer to power off
13.314
And
I start Tails from USB drive "__internal" with network unplugged
1:8.103
And
I enable persistence
23.156
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
16.658
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.696
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
4.066
Then
the Additional Software upgrade service has started
0.236
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.509