And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.764
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.872
And
I accept adding "cowsay" to Additional Software
5.375
And
Additional Software is correctly configured for package "cowsay"
0.765
And
I shutdown Tails and wait for the computer to power off
7.632
And
I start Tails from USB drive "__internal" with network unplugged
1:4.617
And
I enable persistence
8.298
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
12.149
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.424
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.056
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.551
And
I can open the Additional Software configuration window from the notification
2.781
And
I shutdown Tails and wait for the computer to power off
22.887
And
I start Tails from USB drive "__internal" with network unplugged
1:4.723
And
I enable persistence
8.065
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
13.475
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.814
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077