And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.934
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.726
And
I accept adding "cowsay" to Additional Software
5.545
And
Additional Software is correctly configured for package "cowsay"
1.003
And
I shutdown Tails and wait for the computer to power off
4.935
And
I start Tails from USB drive "__internal" with network unplugged
1:7.173
And
I enable persistence
8.838
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
13.470
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.447
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.134
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.061
And
available upgrades have been checked
1.290
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.990
And
I can open the Additional Software configuration window from the notification
2.781
And
I shutdown Tails and wait for the computer to power off
2:2.919
And
I start Tails from USB drive "__internal" with network unplugged
1:5.598
And
I enable persistence
9.618
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.409
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099