And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.632
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.316
And
I accept adding "cowsay" to Additional Software
5.808
And
Additional Software is correctly configured for package "cowsay"
0.827
And
I shutdown Tails and wait for the computer to power off
8.942
And
I start Tails from USB drive "__internal" with network unplugged
1:10.511
And
I enable persistence
8.107
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.448
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.051
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.249
And
I can open the Additional Software configuration window from the notification
2.791
And
I shutdown Tails and wait for the computer to power off
18.664
And
I start Tails from USB drive "__internal" with network unplugged
1:4.797
And
I enable persistence
12.539
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
12.735
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.846
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.048
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092