And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.480
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.614
And
I accept adding "cowsay" to Additional Software
5.431
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
3.064
And
I start Tails from USB drive "__internal" with network unplugged
1:3.323
And
I enable persistence
8.036
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
12.073
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.333
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.066
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.837
And
I can open the Additional Software configuration window from the notification
3.337
And
I shutdown Tails and wait for the computer to power off
9.393
And
I start Tails from USB drive "__internal" with network unplugged
1:3.249
And
I enable persistence
7.801
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
11.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.137
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074