And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.921
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.456
And
I accept adding "cowsay" to Additional Software
5.842
And
Additional Software is correctly configured for package "cowsay"
0.758
And
I shutdown Tails and wait for the computer to power off
7.445
And
I start Tails from USB drive "__internal" with network unplugged
1:4.990
And
I enable persistence
8.039
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
13.019
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.321
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.060
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.645
And
I can open the Additional Software configuration window from the notification
2.746
And
I shutdown Tails and wait for the computer to power off
14.065
And
I start Tails from USB drive "__internal" with network unplugged
1:4.121
And
I enable persistence
7.752
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
11.670
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.491
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.197
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075