And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:48.671
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.689
And
I accept adding "cowsay" to Additional Software
5.464
And
Additional Software is correctly configured for package "cowsay"
0.696
And
I shutdown Tails and wait for the computer to power off
7.585
And
I start Tails from USB drive "__internal" with network unplugged
1:3.001
And
I enable persistence
8.228
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.539
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.382
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.059
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.662
And
I can open the Additional Software configuration window from the notification
2.747
And
I shutdown Tails and wait for the computer to power off
22.767
And
I start Tails from USB drive "__internal" with network unplugged
1:3.554
And
I enable persistence
8.553
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
11.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.354
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096