And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:2.318
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.211
And
I accept adding "cowsay" to Additional Software
5.625
And
Additional Software is correctly configured for package "cowsay"
0.921
And
I shutdown Tails and wait for the computer to power off
8.048
And
I start Tails from USB drive "__internal" with network unplugged
1:7.503
And
I enable persistence
9.550
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
15.169
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.428
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.051
And
available upgrades have been checked
1.116
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.711
And
I can open the Additional Software configuration window from the notification
2.811
And
I shutdown Tails and wait for the computer to power off
21.906
And
I start Tails from USB drive "__internal" with network unplugged
1:7.139
And
I enable persistence
9.633
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
15.219
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.847
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.100
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.135
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083