And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:1.918
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.986
And
I accept adding "cowsay" to Additional Software
7.121
And
Additional Software is correctly configured for package "cowsay"
1.926
And
I shutdown Tails and wait for the computer to power off
8.421
And
I start Tails from USB drive "__internal" with network unplugged
1:8.899
And
I enable persistence
10.407
And
I configure APT to prefer an old version of cowsay
0.062
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
14.811
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.392
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.054
And
available upgrades have been checked
0.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.880
And
I can open the Additional Software configuration window from the notification
3.044
And
I shutdown Tails and wait for the computer to power off
23.275
And
I start Tails from USB drive "__internal" with network unplugged
1:7.340
And
I enable persistence
8.118
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
16.416
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.343
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111