And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.523
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.561
And
I accept adding "cowsay" to Additional Software
5.523
And
Additional Software is correctly configured for package "cowsay"
0.729
And
I shutdown Tails and wait for the computer to power off
7.740
And
I start Tails from USB drive "__internal" with network unplugged
1:3.767
And
I enable persistence
8.135
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
13.616
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.333
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.052
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.041
And
I can open the Additional Software configuration window from the notification
2.761
And
I shutdown Tails and wait for the computer to power off
18.371
And
I start Tails from USB drive "__internal" with network unplugged
1:4.867
And
I enable persistence
7.770
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.523
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.768
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.222
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111