And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.769
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.191
And
I accept adding "cowsay" to Additional Software
5.581
And
Additional Software is correctly configured for package "cowsay"
0.755
And
I shutdown Tails and wait for the computer to power off
7.920
And
I start Tails from USB drive "__internal" with network unplugged
1:5.524
And
I enable persistence
8.023
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
13.062
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.065
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.794
And
I can open the Additional Software configuration window from the notification
2.796
And
I shutdown Tails and wait for the computer to power off
17.228
And
I start Tails from USB drive "__internal" with network unplugged
1:4.192
And
I enable persistence
7.839
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.019
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.137
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094