And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.750
And
I configure APT to prefer an old version of cowsay
0.046
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.164
And
I accept adding "cowsay" to Additional Software
5.383
And
Additional Software is correctly configured for package "cowsay"
0.775
And
I shutdown Tails and wait for the computer to power off
8.040
And
I start Tails from USB drive "__internal" with network unplugged
1:4.021
And
I enable persistence
7.749
And
I configure APT to prefer an old version of cowsay
0.048
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
12.321
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.391
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.055
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.660
And
I can open the Additional Software configuration window from the notification
2.868
And
I shutdown Tails and wait for the computer to power off
18.264
And
I start Tails from USB drive "__internal" with network unplugged
1:3.752
And
I enable persistence
7.734
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.062
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.311
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.047
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070