And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.568
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.056
And
I accept adding "cowsay" to Additional Software
5.960
And
Additional Software is correctly configured for package "cowsay"
0.831
And
I shutdown Tails and wait for the computer to power off
7.575
And
I start Tails from USB drive "__internal" with network unplugged
1:3.135
And
I enable persistence
8.001
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
12.718
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.067
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.731
And
I can open the Additional Software configuration window from the notification
2.763
And
I shutdown Tails and wait for the computer to power off
22.743
And
I start Tails from USB drive "__internal" with network unplugged
1:4.711
And
I enable persistence
7.896
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
12.070
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076