And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.854
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.331
And
I accept adding "cowsay" to Additional Software
5.497
And
Additional Software is correctly configured for package "cowsay"
1.034
And
I shutdown Tails and wait for the computer to power off
7.917
And
I start Tails from USB drive "__internal" with network unplugged
1:6.658
And
I enable persistence
9.680
And
I configure APT to prefer an old version of cowsay
0.052
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
14.458
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.837
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.063
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.258
And
I can open the Additional Software configuration window from the notification
2.842
And
I shutdown Tails and wait for the computer to power off
17.235
And
I start Tails from USB drive "__internal" with network unplugged
1:6.459
And
I enable persistence
9.874
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
14.013
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.313
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.141
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081