And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.212
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.473
And
I accept adding "cowsay" to Additional Software
5.770
And
Additional Software is correctly configured for package "cowsay"
0.761
And
I shutdown Tails and wait for the computer to power off
7.580
And
I start Tails from USB drive "__internal" with network unplugged
1:4.402
And
I enable persistence
8.677
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
11.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.520
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.097
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.061
And
available upgrades have been checked
1.116
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.310
And
I can open the Additional Software configuration window from the notification
2.686
And
I shutdown Tails and wait for the computer to power off
18.346
And
I start Tails from USB drive "__internal" with network unplugged
1:5.912
And
I enable persistence
8.397
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
11.829
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.119
Then
the Additional Software upgrade service has started
0.200
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069