And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.052
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.997
And
I accept adding "cowsay" to Additional Software
5.785
And
Additional Software is correctly configured for package "cowsay"
0.767
And
I shutdown Tails and wait for the computer to power off
7.794
And
I start Tails from USB drive "__internal" with network unplugged
1:4.769
And
I enable persistence
8.562
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
12.549
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.949
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.063
And
available upgrades have been checked
1.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.683
And
I can open the Additional Software configuration window from the notification
2.797
And
I shutdown Tails and wait for the computer to power off
12.355
And
I start Tails from USB drive "__internal" with network unplugged
1:4.698
And
I enable persistence
7.986
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
14.481
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079