And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.167
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.184
And
I accept adding "cowsay" to Additional Software
5.645
And
Additional Software is correctly configured for package "cowsay"
0.755
And
I shutdown Tails and wait for the computer to power off
7.782
And
I start Tails from USB drive "__internal" with network unplugged
1:6.618
And
I enable persistence
8.925
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
13.556
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.483
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.120
And
the network is plugged
0.060
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.812
And
I can open the Additional Software configuration window from the notification
2.853
And
I shutdown Tails and wait for the computer to power off
2:2.480
And
I start Tails from USB drive "__internal" with network unplugged
1:7.090
And
I enable persistence
9.372
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
15.426
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.301
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.271
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.131