And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:2.282
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.646
And
I accept adding "cowsay" to Additional Software
6.222
And
Additional Software is correctly configured for package "cowsay"
0.911
And
I shutdown Tails and wait for the computer to power off
7.681
And
I start Tails from USB drive "__internal" with network unplugged
1:7.362
And
I enable persistence
8.563
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
14.568
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.050
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.730
And
I can open the Additional Software configuration window from the notification
2.857
And
I shutdown Tails and wait for the computer to power off
2:7.196
And
I start Tails from USB drive "__internal" with network unplugged
1:5.349
And
I enable persistence
10.917
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.464
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.920
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
1.870
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077