And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.951
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.980
And
I accept adding "cowsay" to Additional Software
5.795
And
Additional Software is correctly configured for package "cowsay"
0.819
And
I shutdown Tails and wait for the computer to power off
7.941
And
I start Tails from USB drive "__internal" with network unplugged
1:5.228
And
I enable persistence
8.287
And
I configure APT to prefer an old version of cowsay
0.049
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
13.262
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.616
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.123
And
the network is plugged
0.056
And
available upgrades have been checked
1.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.422
And
I can open the Additional Software configuration window from the notification
2.881
And
I shutdown Tails and wait for the computer to power off
18.751
And
I start Tails from USB drive "__internal" with network unplugged
1:4.435
And
I enable persistence
7.975
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.284
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.339
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058